2011 Santa Fe Premium double din stereo install.

  • 8 Replies
  • 14533 Views

0 Members and 1 Guest are viewing this topic.

*

Offline John

  • New Member
  • *
  • 8
2011 Santa Fe Premium double din stereo install.
« on: October 24, 2015, 11:27:57 »
Hi there new here!!! Just collected my 2011 Santa Fe premium 7 seat on Thursday and I'm very happy with it apart from the fact the standard stereo does not have Bluetooth. I have an old double din Pioneer SPH DA 120 unit that I want to install from my old car. I am having issues figuring out the exact fitting kit required from dynamic sounds. Has anyone done anything similar and got any helpful ideas. The standard stereo fitted at the moment is single CD with the large blue display and no Bluetooth.
Any guidance will be greatly appreciated

Regards
John
Drive - Hyundai Santa Fe 2011 Premium - 7 Seat

*

Offline Jon

  • Hero Member
  • *****
  • 576
2011 Santa Fe Premium double din stereo install.
« Reply #1 on: October 29, 2015, 14:15:41 »
Not done it myself, I have the same car plus Hyundai/Parrot CK3100 Bluetooth, but it lacks a2dp audio streaming. But there are Parrot kits that do both phone calls and audio streaming.

If you want to put a double din unit in you need a kit like this, plus the pioneer end of the steering wheel controls.
http://www.caraudiodirect.co.uk/ctkhy04-hyundai-santa-fe-2010-radio-installation-kit
Hyundai 2016 Santa Fe Premium SE Auto with Convenience pack
Previously drove 2011 Santa Fe Premium 7 seat man.
Also ride a 2 wheeled Triumph and fly a 22 wheeled Airbus.

*

Offline John

  • New Member
  • *
  • 8
2011 Santa Fe Premium double din stereo install.
« Reply #2 on: October 29, 2015, 14:32:30 »
cheers thanks ill check them out. i found a good how to video on removing the OEM stereo. Its American but I'm sure it won't be much different https://www.youtube.com/watch?v=0Lm7tc-5kcE
thanks for the advice
Drive - Hyundai Santa Fe 2011 Premium - 7 Seat

*

Offline John

  • New Member
  • *
  • 8
2011 Santa Fe Premium double din stereo install.
« Reply #3 on: October 31, 2015, 11:03:51 »
All sorted and fitted very happy with the result it looks like a standard fit.
Not sure how u post images. Got all the conversion bits from car audio security in Hayes.
Drive - Hyundai Santa Fe 2011 Premium - 7 Seat

*

Offline watto

  • Hero Member
  • *****
  • 631
2011 Santa Fe Premium double din stereo install.
« Reply #4 on: November 03, 2015, 18:02:29 »
Hi,
did you have to remove any of the dash trim, vents etc to gain access or fit a new fascia at all.

been looking at doing this for a while.

cheers
Watto
2011 Santa Fe Premium Vanilla White towing an Elddis Crusader Cyclone

*

Offline John

  • New Member
  • *
  • 8
2011 Santa Fe Premium double din stereo install.
« Reply #5 on: November 03, 2015, 19:51:38 »
Yes the dash trim (Carbon fiber look) from above the glovebox to the steering wheel prys off then two screws remove from under the vents and two screws from the storage box above the stereo removed this allows you to pry off the stereo surround and vents (unplugging the switches and the clock) then 4 X screws holding the original stereo in and it's all out. Bit scary to do but nothing broke and I used plastic trim removal tools.
Drive - Hyundai Santa Fe 2011 Premium - 7 Seat

*

Offline John

  • New Member
  • *
  • 8
2011 Santa Fe Premium double din stereo install.
« Reply #6 on: November 03, 2015, 19:54:39 »
This video helped me a lot
http://youtu.be/0Lm7tc-5kcE
Drive - Hyundai Santa Fe 2011 Premium - 7 Seat

*

Offline John

  • New Member
  • *
  • 8
2011 Santa Fe Premium double din stereo install.
« Reply #7 on: November 03, 2015, 20:23:21 »

Drive - Hyundai Santa Fe 2011 Premium - 7 Seat

*

Offline watto

  • Hero Member
  • *****
  • 631
2011 Santa Fe Premium double din stereo install.
« Reply #8 on: November 04, 2015, 19:05:43 »
crikey, that looks brutal but thanks for the post.

watto
2011 Santa Fe Premium Vanilla White towing an Elddis Crusader Cyclone